How to fit your PeggiPics display

Unless otherwise stated, PeggiPics displays purchased from our official online store (this one) stick strongly to a variety of surfaces including wood, tile and glass as well as painted walls. Not suitable for damaged, delicate or wallpapered surfaces.

When needed, your display can also be removed cleanly by following this guide.

 

BEFORE YOU BEGIN

  • If your wall has recently been painted, wait one to two weeks for the paint to fully dry and cure before fitting your display.
  • Ensure the area you are mounting your display on is smooth and even.
  • Thoroughly wash and dry your hands to avoid marking your wall and display.

 

FITTING YOUR DISPLAY

  1. First, clean the wall with isopropyl rubbing alcohol by wiping gently. Don't use household cleaners like wipes or sprays because they leave behind a slippery residue.
  2. Remove the black and white liner from the back of your display.
  3. Now press the center of the shape firmly against the wall for about 60 seconds. The harder you press, the stronger the adhesive bond will be.
  4. Wait 1 hour before hanging anything on your display. This allows the adhesive bond to reach maximum strength.

 

REMOVING YOUR DISPLAY

  1. Hold the top and bottom of the shape with thumb and fingers, and gently twist a little clockwise and then anticlockwise.
  2. Repeat, twisting a little further each time. Eventually the adhesive pad will give way, and the shape will come away from the wall.
  3. It is important to be patient when doing this, and to only twist and not pull the shape out towards you, or you may damage your wall. If the adhesive pad remains on the wall, slowly stretch it out against the wall (do not pull towards you), and it will eventually release.

 

HELP! MY DISPLAY HAS FALLEN OFF!

Very occasionally, there may be a surface or paint that is not compatible with the removable sticky pads. If this happens you will need to use a heavy duty adhesive foam pad or tape to mount your display.